Concrete Fibers

Frequently Asked Questions on the use of Euclid Chemical's PSI Fiberstrand and TUF-STRAND fiber products.


  • ECTB F-1


    ECTB F-1

    What are the differences between micro and macro-synthetic fibers?


  • ECTB F-2


    ECTB F-2

    TUF-STRAND SF Slab on Ground Design for temperature and shrinkage crack control


  • ECTB F-3


    ECTB F-3

    TUF-STRAND SF thin wall and precast design for bending moment steel conversion


  • ECTB F-4


    ECTB F-4

    FAQ's on Slump, Air Content and Compressive Strength when using TUF-STRAND SF


  • ECTB F-5


    ECTB F-5

    FAQ's on Steel Fibers versus Synthetic Fibers


  • ECTB F-6


    ECTB F-6

    FAQ's on Fiber Types and Mixing Problems


  • ECTB F-7


    ECTB F-7

    FAQ's on Fibers for Joint and Floor Thickness


  • ECTB F-8


    ECTB F-8

    FAQ's on Technical Issues when using Fibers


  • ECTB F-9


    ECTB F-9

    FAQ's on Secondary Reinforcement and Composite Steel Deck Systems


  • ECTB F-10


    ECTB F-10

    FAQ's on Pumping and Finishing FRC


  • ECTB F-11


    ECTB F-11

    Performance Based Specifications for Fiber Reinforced Concrete (FRC)


  • ECTB 10-16


    ECTB 10-16

    Recommended Practices for Addition of TUF-STRAND SF to Ready-Mixed Concrete